Mild Steel
You need to be logged in to see prices.DIN7h8 Metric Unhardened Dowels are produced with an 'h8' push fit tolerance in both Mild Steel and Stainless Steel. Our standard metric diameter range is from 0.8mm up to 20mm diameter and lengths 3mm to 120mm are available. This range of unhardened pins is produced from material 1.0718 Mild Steel or 1.4305 (A2) Stainless Steel.
Please note that the nominal length of a DIN7h8 pin is measured along the parallel surface only, the chamfers at each end of the pin are not calculated as part of the nominal length.
Diametrical tolerance 'h8' limits are further explained in the chart below.
| Diameter Range | Tolerance Band (h8) |
| From 0 to 3mm | +0.000 / -0.014mm |
| From 3 to 6mm | +0.000 / -0.018mm |
| From 6 to 10mm | +0.000 / -0.022mm |
| From 10 to 18mm | +0.000 / -0.027mm |
| From 18 to 30mm | +0.000 / -0.033mm |
If you require unhardened mild steel or stainless steel push fit tolerance pins which are measured overall please refer to our specification S01 or L01.
If you require interference fit pins to be measured overall please refer to our specifications R01 (unhardended steel) or K01/F01 (stainless).
Pinco series N01 (Mild Steel) and E01 (Stainless Steel), for further detailed information please contact us.
| Product Standard description | Dowel Pins, DIN7h8 |
|---|---|
| Pinco Part Number | N01, E01 |
| British (BS) | |
| DIN | 7h8 |
| ISO | |
| Others | |
| Standard Stock range | DIN 7h8 |
There are no reviews for this product yet. Be the first to add one!
